Modern Maintenance Products was formed in 1993 and has grown into a diverse industrial coatings supplier to New Zealand industry and domestic applications.
We have proven products in the New Zealand market since 1993 which include
Whether it be for a fishing trawler, hospital roof, severe corrosion or just a leaking pipe, we have materials that can repair the problem on most occasions.
Noxyde is an anti-corrosion waterproof membrane that can be applied to a multiple list of substrates to provide robust waterproofing or anti-corrosion protection.
If you have issues with your Asbestos roof, then before replacing, let us arrange an exterior inspection with an approved Asbestos consultant, to determine whether the roof can be salvaged or not.
ROC 9100 Direct-to-Metal Epoxy is a two-component, high solids epoxy coating that provides a durable, abrasion and chemical resistant protective surface suitable for most all industrial environments.
9100 High Performance immersion epoxy is the best swimming pool epoxy coating. It has been applied in New Zealand for over 30 years and has proven to extend the best long-term performance.
It is so much easier to apply, having a 1:1 mix ratio for partial mixing which reduces the wastage significantly.
It can be roll or spray applied with a pressure pot or an airless system.
Requires no other primers and can be applied directly to prepared existing epoxy coatings, or directly to prepared concrete substates.
A fantastic pool coating product.
The 3800 System DTM Acrylic Enamel is a fast dry, water based, low VOC acrylic finish for both indoor and outdoor direct to metal applications.
ROCThane Direct-to-Metal Urethane Mastic 9800 is an aliphatic acrylic urethane designed to provide the ultimate in protection and long-lasting appearance. This product is formulated to fight rust while delivering durable colour retention in aggressive environments.
InstaPatch® Ultra-Rapid Curing Concrete Repair patches damaged concrete floors, and cracks on floors and driveways, in just minutes, significantly reducing downtime.
Panel Bond Bandage which is used by our contractors as a joint sealant in cool stores, a remedial fix for flashing’s on roofs, and many other uses around the waterproofing industry.
Fillcoat® Fibres Repairs holes and cracks up to 2mm instantly and is faster and considerably cheaper than calling the plumber.
A liquid elastomeric waterproofing membrane reinforced with microfibers and high aluminium content, for waterproofing and continuous ponding water, i.e. internal gutters.
If a customer cannot complete a repair, we utilise professional trades people, and have the ability to project manage a job to completion. We would like to hear from you, should you have any maintenance enquiries.
